- – 38mm or 50mm tall filament-wound rim with 26mm external and 19mm internal rim width. Filament winding puts the carbon’s strength where it’s needed allowing crucial weight savings in non-essential areas.
- – Tubeless-ready hooked rim bead-seat supports tubeless tires from 23-45mm. Tested with Schwalbe Pro One, Continental GP5000 TL.
- – High-temperature resistant, high-friction braking surface on rim brake versions.
- – Carbon fibre spokes with excellent strength to weight ratio weighing 2.6g per spoke.
- – Aerodynamic profile for decreased air resistance.
- – Rear wheel : 2:1 spoke lacing on rear wheels. 21 spokes.
- – Front wheel : 2:1 spoke lacing on disc brake wheels, 21 spokes. Radial lacing on rim brake wheels, 16 spokes.
- – Bespoke engineered Winspace hubs.
- – Over-sized 17mm central axles.
- – Supplied with standard Shimano compatible 11s freewheel body.
- – SRAM XDR Driver also availible upon request.
- – Bicycle specific Ceramic bearings for decreased rolling resistance.
- – Compatibility: Disc brake versions compatible with F:12×100 R:12×142 thru-axles.
Actual listed weights as follows:
- – 38mm rim brake: 1267g.
- – 50mm rim brake: 1349g
- – 38mm disc brake: 1343g.
- – 50mm disc brake: 1425g.
- – All weights are supplied for fully built wheelsets consisting of rims, spokes, nipples, hubs, bearings and freehub assembly and are accurate to +/-3% .
- – Compatible with regular clincher tires with innertubes.
- – Compatible with tubeless-ready tires from leading manufacturers.
- – When using tubeless tires do not exceed 100psi for riding. (Upto 120psi may be required to initially seat the tire) 100psi is plenty for road tubeless.
- – Tire pressures should decrease as sizes increase. EG: 30mm tire no more than 85psi, 35mm tire no more than 60psi, 40-45mm tire no more than 40psi.
The system limit (Rider + bike + luggage, etc.) is 135kg. However, riders above 95kgs should regularly inspect their wheels or get a qualified bike mechanic to do so.
- – rim brake versions: Wheels, QR Skewers, Tubeless Rim Tape, Tubeless Valves, Valve Extenders, Brake Pads.
- – disc brake versions: Wheels, Tubeless Rim Tape, Tubeless Valves, Valve Extenders.
Disc Brake Fork Compatibility
In order to extract maximum performance out of our wheelset and get the most of the mechnical advantage that carbon spokes bring our Lún HYPER wheels are designed with a rather large hub flange for the spokes. This is a common practice amongst many high performance wheelsets. However, it is recommended to check your front forks before ordering. Please make sure the inner face of your fork is flat and does not feature ‘recessed dropouts’ as in the left-most example below. Most forks on the market feature standard ‘in-line’ drop outs and we have tested our wheels with many forks, but it is impossible for us to test with every fork out there, so if you’re unsure about this, please contact us for help.
We stand by all our products and offer a 2 year warranty on our Lún Hyper wheels.
This wheelset carries a limited warranty of two (2) years from the date of purchase to the original owner only. Unless otherwise stated, the sole remedy under this warranty or any implied warranty is limited to the replacement of defective parts with thos of equal or greater value at the sole discretion of Winspace. Winspace will not be responsible for any direct, incidental or consequential damages, including, without limitation, damages for personal injury, property damage, or economic losses, whether based on contract, warranty, negligence, product liability or any other theory. This warranty does not cover normal wear and tear on parts in situations where there are no material defects. This warranty does not cover consumable components including brake pads, spokes, rim tapes, bearings, etc.
There are no reviews yet.